Skip to content

General Purpose

PT Victorindo itself is a large distributor that provides various types of pumps, spare parts (gear pumps, boilers, lubricants, etc.), valves (palm oil mill valves, steam valves, and various valves for the palm oil industry).
An integral safety relief valve turns on the casing or head allowing fluid by-passing from back discharge to suction on the pump side. The valve is reversed when reversing the pump rotation on the pump size. Small pumps with release valves are built with right hand suction as standard. Special left hand.
Head permit or jacketed plate controls the temperature of the pumped liquid. Jacketed plates are available on “G” to “LL” pump sizes. Jacketed heads are available in “Q” to “N” sizes. Relief valves are not available with jacketed heads or plates.
Pumps of size “C”, “F” and “FH” are equipped with upright port sheaths: Pumps of size “G” with ports opposite the casing and “H” through the size of “N” pumps with right angle port shells. The right hand port is determined by the sealing port side when facing the pump from the end of the shaft. The left hand case is equipped only with special orders.
The sizes “G”, “H” and “HL” are illustrated. All Multipurpose pumps are available with packed boxes. Mechanical seals are available at “C” via standard size “HL” pumps. Seals are a type of rotary packed unit that is simple and independently adjusts.
The General Purpose Viking Pump is extremely extreme and is suitable for light, medium and compatible services to handle a variety of liquids. The smaller sizes “C”, “F” and “FH” are built for heavier duty services. The mechanical seal is equipped with General Purpose pump models in sizes from “C” to “HL” shown in this section available with an underwriter label for handling fuel oil. For this pump it must be marked with the -X suffix. “UL” registered models can be equipped with integral relief valves. Also for continuous service and for handling viscous liquids, see the Viking channel heavy duty pump.
The rotational advantage of a Viking General purpose pump is very stable compared to other pumps and has an effective suction of incoming fluid. This type is designed to be very efficient because it naturally expels air from the flow pipe, and reduces the need for users to remove the air manually.
Viking General Purpose flow speed is around 1 m3 / hour. Making this pump with a cast iron process, there are lip seals, and mechanical seals so as to minimize the level of leakage. The special metal is to support resistance at pressures up to 3 to 7 bar and withstand temperatures of -51oC to 232oC.
In the palm oil industry, pumps are a component that has a very important role in the process of running an industry, for example for the purposes of fast flow, filling reservoirs, and waste disposal. Some of the features of this pump are:
  • Simplified rotor retention system, economical for medium duty applications.
  • Back pull-out seals provide access without disturbing the wet end.
  • Long shaft standard for pillow block and belt drive, or reducer drive.
Distributor PT Victorindo highly recommends you to the Viking General Purpose pump, because the pump in our place is original and well tested. For reservations you can contact directly to the distributor PT Victorindo. We work directly with companies that produce Viking pumps. To maintain customer satisfaction. You do not need to worry if there are problems with these tools in the future because we also prepare reliable technicians to service or repair the equipment.
For further information, please contact the contact below:
Phone: +62 618 8809 911
LinkedIn: @victorindogroup

Leave a Reply

Your email address will not be published. Required fields are marked *