Skip to content

High Pressure Spur Gear

The Viking Spur Gear series pumps are ideal for low capacity, high pressure, motor speed applications. All pumps increase by 40% capacity, so there are always pumps within 20% of your capacity requirements. We describe this Viking output pump, the Mag Drive Spur Gear Pump.
The Viking Pump Mag Drive Spur Gear Pump uses a magnetic force which passes through a statically sealed tube to drive the pump. This eliminates the need for traditional dynamic shaft seals such as packing or mechanical seals. In turn, this eliminates the danger and chaos caused by leaking packages or mechanical seal failures, making this the ideal solution for hazardous fluids / liquids such as hazardous liquids such as caustic or acidic, flammable liquids such as fuel or alcohol, liquids that are difficult to cover such as resins or isocyanates used in the production of polyurethane foams, strong aromatics such as perfume or mercaptum, expensive liquids such as heat transfer liquids or those used in pharmaceutical production, applications where seal failure is completely unacceptable such as pipe sampling
The combined magnet is attached to two concentric rings on both sides of the containment shell at the pump housing. The outer ring is attached to the motor drive shaft, the inner ring to the impeller drive shaft. Each ring contains about the same amount of identical, matching and opposite magnets, arranged with poles back and forth around each ring. Magnets are often made from rare earth metals such as samarium or neodymium which are mixed with other metals. The most common combinations are Samarium-Cobalt and Neodymium-Iron-Boron. This complex alloy has two main advantages over traditional magnets.
This centrifugal pump has a flow power of 45 m3 / hour with a rotational speed of 1800 RPM. Making this pump with a cast iron process, there are lip seals, and mechanical seals so as to minimize the level of leakage. The special metal is to support resistance at pressures up to 500 psi and withstand temperatures of -40 to 230oC.
In the palm oil industry, pumps are a component that has a very important role in the process of running an industry, for example for the purposes of fast flow, filling reservoirs, and waste disposal.
      The pump type Mag Drive Spur Gear Pump is designed to have the best features and components. Therefore, this pump has the highest rank in terms of needs in companies. Some of the features of this pump are:
  • Hazardous liquids such as caustics or acids
  • Flammable liquids such as fuels or alcohols
  • Liquids which are difficult to seal such as resins or isocyanates used in polyurethane foam production
  • Strong aromatics such as perfumes or mercaptum
  • Expensive liquids such as heat transfer liquid or those used in pharmaceutical production
  • Applications where seal failure is absolutely unacceptable such as pipeline sampling
Viking Pump Mag Drive Spur Gear Pump from PT Victorindo is the best. In addition we provide pumps, gear pumps, valves, etc. with original and high-quality goods. You can contact directly to the distributor PT Victorindo. We work directly with companies that manufacture Dividers pumps. To maintain customer satisfaction. You do not need to worry if there are problems with these tools in the future because we also prepare reliable technicians to service or repair the equipment.
For further information, please contact the contact below:
 
Phone: +62 618 8809 911
LinkedIn: @victorindogroup

Leave a Reply

Your email address will not be published. Required fields are marked *