Skip to content

Mag Drive Motor Speed

The Viking spur gear pump product is a pump with pumping principle that offers many advantages over both centrifugal pumps and other types of displacement.
PT Victorindo is a large distributor that provides various types of pumps, spare parts (gear pumps, boilers, lubricants, etc.), valves (palm oil mill valves, steam valves, and various valves for the palm oil industry).
This Viking Mag Drive Motor Speed ​​pump offers superior IEC or NEMA motor mount and ANSI or DIN flanges. Casing and canister drain facilitate pump maintenance. And offers NPT / BSP or ANSI flange ports and NEMA motor mounts.
This pump has a long pair design for applications that require speed reductions, perhaps due to the control of the rotor thrust and the long distribution bearings. Protect pumps during priming and accidental empty tank situations. Flanged flanged ports are standard, offering better sealing reliability than threaded ports. The in-line port is easy for pipes, and can be rotated 90 ° to vertical or horizontal positions. The reverse flow controls the double direction thrust and cooling allows the pump flow to be reversed, by reversing the direction of rotation.
The bearing axle bearings ensure compatibility with local standards throughout the world. Adjustable end clearance of head shims allows tip adjustments to maximize low-efficiency or high-viscosity fluids, and as compensation for use over time.
Optimized flow motor Viking Mag Drive Motor speed operation of the pump allows operation at motor speed on many liquids to eliminate fast dampers and minimize unit traces. The enclosed parts are designed or coupled to long pairs in close proximity to the motor to a speed of 15 kW (20 HP) to facilitate installation and remove shaft couplings, shafts and shaft alignment. An optional bearing allows coupling to a speed reducer, a gear motor, or a standard motor where needed.
This pump is also equipped with standard valve pressure relief to release integral pressure. Drain easily and flush for batch operations or prior to maintenance, pump room ducts and tube ducts allow drainage and facilitate flushing. Designed for ease of maintenance If the pump requires maintenance, it is designed for easy drying, disassembly, repair and reassembly, with a minimum number of parts, and no special tools.
The flow speed of the Viking Mag Drive Motor Speed ​​is around 30 m3 / hour. Making this pump with a cast iron process, there are lip seals, and mechanical seals so as to minimize the level of leakage. The special metal is to support resistance at pressures up to 14 bar and withstand temperatures of -45oC to 110oC.
In the palm oil industry, pumps are a component that has a very important role in the process of running an industry, for example for the purposes of fast flow, filling reservoirs, and waste disposal.


  • Series 855 offers IEC or NEMA motor mounts and ANSI or DIN flanges.
  • Casing and canister drains facilitate servicing.
  • Series 893/895/897 offer NPT / BSP or ANSI flange ports and NEMA motor mounts.
  • Long-coupled design available for applications requiring speed reducers.
PT Victorindo as a large distributor provides various types of pumps. You can directly contact PT Victorindo for the needs of the unit. We work directly with companies that produce Viking pumps. To maintain customer satisfaction. You do not need to worry if there are problems with these tools in the future because we also prepare reliable technicians to service or repair the equipment.
For further information, please contact the contact below:
Phone: +62 618 8809 911
LinkedIn: @victorindogroup

Leave a Reply

Your email address will not be published. Required fields are marked *