Skip to content


Technological sophistication affects the results of a product that is of the best and quality. Highlighting this matter PT Victorindo also compensates for cooperation with quality pumping companies, PT Victorindo itself is a large distributor that provides various types of pumps, spare parts (gear pumps, boilers, lubricants, etc.), valves (palm oil mill valves, steam valves and various valves for the palm oil industry). In this case we will explain about the Ammonia Pump Viking product. Ammonia Viking Series Pumps which offer safety, reliability and high efficiency in cooling ammonia recirculation applications. Safety is achieved through the use of a dual mechanical dynamic shaft seal located between the bearings for minimum possible exhaustion, with a pressurized liquid barrier system, and a static O-ring type seal where components are joined. Reliability is provided by slow speed operations and low differential pressure, which maximizes bearing and seal life. And efficiency is inherent in the principle of pumping Internal Gear, compared to centrifugal pumps. Viking pumps can usually use at least one motor size smaller than this technology.
The working principle of this Viking Amonia Pump provides a very low NPSH (Net Positive Suction Head), to minimize the potential for flashing or cavitation. The shaft rotates the rotor gear, which then turns the idler wheel (mounted on the idler pin in the head window). As they spin, they create a liquid cavity filled with ammonia on the suction side, then collapse the cavity to force the liquid out on the discharge side. Carbon graphite axle and idler bushings provide excellent low viscosity gear / shaft support.
Viking Amonia Pump periodically always develops the latest innovations. One of the innovations is the simplified bearing housing on the bracket at the end of the clearance, which helps ensure optimum efficiency and can compensate for wear over time. With a design like this, you can simply turn the bearing housing clockwise until it stops, then back away from the adjusted distance. The old style required rotating two end cap pads and measuring the tip distance with a gauge feel, which required removal from service.
The rotational advantage of the Spur Gear Pump is very stable compared to other pumps and has an effective suction of incoming fluid. This type is designed to be very efficient because it naturally expels air from the flow pipe, and reduces the need for users to remove the air manually.
Ammonia Pump Viking flow speed of about 14 m3 / hour. Making this pump with a cast iron process, there are lip seals, and mechanical seals so as to minimize the level of leakage. The special metal is to support resistance at pressures up to 3.5 bar and withstand temperatures of -40oC to 107oC.
In the palm oil industry, pumps are a component that has a very important role in the process of running an industry, for example for the purposes of fast flow, filling reservoirs, and waste disposal. Some of the features of this pump are:


  • Double mechanical seals with pressurized seal chamber and oil reservoir pressurized by ammonia, no external flush system required.
  • Adjustable return-to-tank pressure relief valve.
  • Pressure-lubricated idler bushing maximizes bushing life.
  • Designed for ammonia refrigeration systems.
Pump type Viking Pump Spur Gear Pump from distributor PT Victorindo is highly recommended for you, because the pump in our place is original and well tested. For reservations you can contact directly to the distributor PT Victorindo. We work directly with companies that produce Ammonia Pump pumps. To maintain customer satisfaction. You do not need to worry if there are problems with these tools in the future because we also prepare reliable technicians to service or repair the equipment.
For further information, please contact the contact below:
Phone: +62 618 8809 911
LinkedIn: @victorindogroup

Leave a Reply

Your email address will not be published. Required fields are marked *