Skip to content

Etaprime L

PT. Victorindo is a distributor of all types of valves and pumps that have a cooperative relationship with various valve companies. We provide various pumps for palm oil mills. One of the products we offer is Etaprime L from KSB.
Etaprime L is a centrifugal pump that can be used in various applications, such as irrigation spray systems, water supply systems, fire pumps, lowering ground water levels, air conditioning systems, and swimming pools. This Etaprime L pump has a fairly high performance frequency, between 50Hz to 60Hz. This Etaprime L is made of stainless steel which is heat-resistant and durable.
This centrifugal pump is designed with the following design details: volute casing pump with back pull out design so that it is easy to disassemble, horizontal installation, self priming, valute sheath with integrated cast pump feet (from pumps of size 40-140) making pumps it’s sturdy and strong. Etaprime L has a single-stage system with a volute casing that is radially split.
The most interesting accessory of this pump is the thermal class F with a temperature sensor that can detect the actual liquid temperature. The shaft is equipped with a shaft sleeve which can be replaced in the shaft seal area (from pump size 40-140). The pump shaft is mechanically sealed according to EN 12756.
This centrifugal pump is equipped with a very unique impeller. This impeller can be opened equipped with multiple propellers so as to minimize the entry of water into the main engine. The pads on the Etaprime L pump are lubricated by grease or grease. This Etaprime L has several advantages, including: mechanical seals on the maintenance-free pump shaft ensuring a reliable operating system, the volute casing is easy to disassemble because of the pull-back design so there is no need to remove the pump casing from the pipe, good suction power with self-priming up to 9m , the optimal hydraulic component for increasing efficiency thereby reducing excess energy consumption. This pump has quality certification up to ISO 9001. In general, the etaprime L pump has the following specifications:
  • Horizontal volute casing pumps, single-stage, with open multivane impeller, sizes 40-140 and above with bearing bracket, in back pull-out design.
  • Sizes 40-140 and above with replaceable shaft sleeve in the shaft seal area. Volute casing with integrally cast pump feet.
  • Pump connections to DIN/EN or ASME.


  • Deep-groove ball bearings, grease-lubricated

Shaft seal

  • Single- or double acting mechanical seal to EN 12 756.
If you want to find out more about the Etaprime L centrifugal pump from KSB you can directly visit the office of PT. Victorindo. In addition, you can also visit our social media or contact our contact below.
For further information, please contact the contact below:
Phone: +62 618 8809 911
LinkedIn: @victorindogroup

Leave a Reply

Your email address will not be published. Required fields are marked *